Onkyo receiver hdmi setup

When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to "Off". When making the change to this setting, turn off and then on again the power of all connected components. In such case, audio is output from the speakers of the unit. If you do not want to output audio from the unit, change the unit or TV settings, or reduce the volume of the unit.

This function is related to the preview thumbnails of the video input through HDMI, which will be displayed using "InstaPrevue" in the Home menu. Depending on the video source, the preview thumbnails configured in "InstaPrevue" may not be displayed properly. While most devices have moved away from the large, boxy AC to DC adapters that stick out of the wall or hang off the socket, they can still pose a problem. Depending on the type of power delivery accessory you choose, these types of plugs might interfere with neighboring outlets.

Some power delivery device manufacturers have taken this into account, and rotated the plugs to make it less of an issue. Different types of Power Protection There are 3 different types of power distribution and protection devices. Very low cost. Minimal, if any, protection. Most power surges are just passed through to your equipment which can damage or ultimately destroy them. Some models have a small fuse in them which is destroyed when a particularly strong surge occurs.

Average cost. Provides decent protection to your devices. Some of these types tend to offer some extra protection as well for cable lines or networking lines. Many come with simple warranties that protect against power surge damage should your devices incur any while connected to one of these.

Very high cost. Provides not only decent protection, but also 'conditions' the power, so there's little if any noise or power fluctuations introduced to your equipment.

While subjective and very dependent on what is coming to your equipment in the first place, some people feel it can help with picture and sound quality. These tend to be aesthetically pleasing, and integrate well with modern home theater and surround sound setups. Many devices can make Wi-Fi connections. This usually works just fine, but just like any other Wi-Fi device, it can end up with interference that can cause stuttering, lower picture quality, or a complete inability to play.

If possible, it's always a great idea to consider setting up a hard-wired Ethernet connection for your devices. Also, this tends to be easier; no passwords to remember, just another wire to plug in. If you see one, you don't have to use Wi-Fi to connect it to your home network.

You can use that wired connection to provide faster, easier setup. To make things even easier, you can use a network switch to connect everything with one cable back to your router. These are small boxes that basically give you more Ethernet ports for the back of your router. The benefit here would be that you'd connect all of your home theater devices to the switch, then have only one Ethernet cable connecting your switch to your router, giving you the most reliable connection possible for all of your connected home theater devices.

Speaker wire has a polarity. In other words, it matters which side plugs in where. Most speaker wire will already be in a bundle of 2, and one of the cables will be a different color, or have a stripe of color or a label of some sort so you can identify them easily. You will need one 'run' of cable both wires for each speaker. Make sure it is long enough to not only reach, but follow the contours of your room, and some extra for slack. This keeps them from being accidentally pulled out.

Depending on the model of the receiver you are using, the type of terminal you will plug your speaker wire into may vary. Many receivers and speakers may allow for you to use something called banana plugs, which can be attached to the speaker wires before plugging them in to give a cleaner, easier-to-use, and more permanent solution for connecting your speakers to your receiver. Connect each speaker to your receiver.

Pay close attention to positive and negative markings on each speaker wire, as not all speaker wire is color coded like the speaker inputs are on your receiver.

Depending on the type of speaker terminals your receiver has, insert the wires following the illustration below. Connect your subwoofer. This tends to be a single RCA-style cable. In most cases, most people prefer to use the simple, excellent HDMI connection between their home theater receiver and their TV. Plug one end into the back of your TV. Connect the other end of the cable to your receiver. If necessary, connect a digital optical cable to the back of your TV optical out , and the other end to your receiver optical in.

Connect the coax cable from your premium television provider to your cable or satellite decoder. If you're using one, connect the coax cable from your outdoor antenna to the back of your TV for over-the-air TV signal. If you're using one, connect the coax cable from your outdoor antenna to your receiver for FM radio signals. If you're using one, connect the simple 2-wire lead for your AM antenna to your receiver for AM radio signals.

If you intend to use a hard-wired Ethernet connection for your TX-NR, connect one end of the Ethernet cable to the port on the rear of your receiver, then the other end to your network switch, or directly to your home's router. Connect each of your sources Blu-ray, cable box, game console, etc. Many connectors will have labels to guide you. Connect this to your power management device.

Connect power for all your other devices to your power management device as well. Turn on your home theater devices, and test them out. Make sure you can watch premium TV.

Make sure you can watch a Blu-ray movie. Make sure your game console works. Make sure any audio devices, such as a record player, work. Make sure the speakers are in the correct locations. Test any other device you have setup as part of your home theater. We're here to help! Related articles. Press the Setup or Settings button on your remote to enter setup.

Select Hardware. Select Network. Select Network Connection and change it to Wireless. Select Search Wireless Network. Select your Network. Type in your password using the remote. The Wi-Fi indicator light will flash and your receiver will attempt to connect using the settings provided. If the connection is successful, your receiver will display a Connected message. We can now begin bundling together and making the cables behind your system neat and tidy.

Cable bundling Cable bundling will most likely be the first step in cleaning up the cables from your home theater installation. Cable Ties Sometimes called zip ties, these are plastic, with a groove on one side, and a simple locking mechanism on the other. After securing the cables, cut off the remaining end of the cable tie. Given their incredibly low price, they are disposable. When you need to add another cable, you cut the old one off, and just use a new one. Velcro Straps Much like cable ties, a simple Velcro strap has hooks on one side, felt on the other.

The benefit is they can be easily un-bundled or added to, without cutting the strip and having to use another. Raceways Sometimes called cable tunnels, these are for where cables are exposed, such as between your television and receiver, or going to your speakers.

They place a cover over your cables to hide them in an aesthetically pleasing way. Many have little notches to lock your cables into. Label Everything During your bundling process, it's often a good idea to use small labels near the ends of each cable, just in case you need to disconnect something in the future. Privacy Matters Support.

We do use cookies and other third-party technologies to improve our site and services.